The coop has reached another milestone. It has a door.
For a reminder, this spot in the barn foundation used to be a window. Part of the wall under the window collapsed in 2018, so anticipating the coop I had our mason reconstruct the wall into a door. He tacked some plywood over the opening, and that’s how it stayed for the past 6 years. Bananas that it’s been that long.
Now that the coop is finally on track, I needed a proper door. Especially now that new coop wall is up, I don’t have an easy way to get into this part of the barn.
I wanted to reuse the door of the old coop. The wood is amazing. This beautiful weathered grey. And huuuuuuge boards. Just two boards make the whole door. One is about 16 inches wide. The door was close to the size we needed and relatively sturdy. Plus you know I love the symbolism of using a piece of the old coop in the new one.
But after thinking it over (and lifting it in and out of the doorway multiple times), I decided it wasn’t close or sturdy enough. A lot of the nail holes have expanded over the years, so it has a wiggle that would have needed reinforcing. I also would have had to extend the height. All of that felt like it would take away from the character of the old door–which is what I loved.
The deciding factor was the hinges. From the wear patterns on the wood, the hinges have been on there for a long time. But they were crooked, and I didn’t feel like dealing with that on top of the other issues.
So I took some of the leftover siding and built a new door. (The old door will find a spot some day.)
I was a bit intimidated about framing the opening and building the door. Growing up with my Dad, a professional contractor, he had two types of projects that always required extra figuring: stairs and doors. So I had that in my mind as I was working.
I framed the opening and the door at the same time, so I made everything to the exact dimensions I wanted. It took me a couple of tries to figure out how I wanted to build the jamb, but now it is sturdy and plumb. I made the door bigger than the opening and then carefully cut it down–after measuring many more times than twice.
I installed the hinges so they’re square and when it came time to hang the door, everything went together smoothly.
Ellie selected the best spot for the handle and latch and she screwed them into place. Then she modeled the new door in action for photos. I’m glad I’ve been able to include her in so many parts of this project.
I also did a little more clean up around the outside. I had one spot covered with a tarp for most of the summer. This is my preferred method to kill the weeds and grass so that I can then see what’s lying on the ground.
As you can see below, the tarp revealed mostly rocks and sticks. But there were also 5 1/2 fence posts (one wrapped in wire), a hunk of metal and a length of wire fence. None of this I want to mow, so in a mystery area, clearing the weeds, picking up the mess and leveling the ground is my preferred technique.
I have now slid the tarp over to cover a new spot.
While I had my rake, shovel and tractor, I laid some patio slabs in front of the door to make a little landing area. I spread some dirt around the stones to hold them in place and even sprinkled some grass seed. I might be a little late on the seed, but I’m hoping to keep this spot from getting too muddy as I continue to work on the coop.
Every step on this project feels like another milestone and gives me more motivation to keep building. I’m very proud of the door. Proud of the coop. Proud of myself.
